What are the power requirements for my workstation's PSU?

The power requirements for Lambda workstation power supply units (PSUs) are as follows:

Power connector inlets and outlets

This is what a C14 inlet looks like:

This is what a C13 outlet looks like:

This is what a C20 inlet looks like:

This is what a C19 outlet looks like:

Power cord plugs and receptacles

SF-1300F14MG V1.0 1300W PSU

For customers in North America, the SF-1300F14MG V1.0 1300W PSU power cord has a NEMA 5-15 plug. The plug inserts into NEMA 5-15 and NEMA 5-20 receptacles, which look like this:

On request, a C13-C14 power cord can be substituted for use with power distribution units (PDUs) commonly found in data centers.

SF-1600F14HT 1600W PSU

For customers in North America, the SF-1600F14HT 1600W PSU power cord uses a NEMA 5-20 plug. The plug inserts into a NEMA 5-20 receptacle, which looks like the receptacle on the right in the picture, below.

On request, a C19-C20 power cord can be substituted for use with power distribution units (PDUs) commonly found in data centers.

SF-2000F14HP 2000W PSU

For customers in North America, the SF-2000F14HP 2000W PSU power cord uses NEMA 6-20 or NEMA 6-15 connectors, which look like the ones in the third row in the picture, below.

On request, a C19-C20 power cord can be substituted for use with power distribution units (PDUs) commonly found in data centers.

Uninterruptible power supplies (UPSs)